4.2 Operation through control cable
4.2.1 Comfort deluxe vacuum hose
– Connect the telescopic tube with the suction
hose and the required accessory.
– Insert the suction hose by means of the bayonet
connection in the appropriate suction box. The
contact surfaces must face upwards.
– To start or end the vacuuming operation turn the
switch on the tube bend on or off.
4.2.2 Comfort vacuum hose
– Connect the telescopic tube with the suction hose and the required accessory.
– Insert the suction hose by means of the bayonet connection on the appropriate suction box.
– Remove the suction hose from the suction box to end the operation.
Note:
After finishing the vacuuming process it is essential to remove the suction hose from the suction box because other-
wise the central vacuuming unit will continue to run and only be turned off automatically after 15 minutes!
4.3 Operation through appliance switch
In the case of vacuuming through the appliance suction box the system can be switched directly through the appli-
ance on and off switch.
16
Note:
If the system is optionally running by radio or
control cable the processor will only be com-
pletely turned off if all switch contacts are also
turned off.