Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BMF 203K-H Série Notice D'utilisation

BMF 203K-H- _ _ -C-A _ -... / BMF 235K-H- _ _ -C-A _ -...
Magnetic Field Sensors
1
Notes to the user
1.1 Validity
This guide describes the construction, function and
installation of the BMF magnetic field sensors. It applies to
the following models (see Type code on page 24):
– BMF 203K-H- _ _ -C-A_ -PU _ _
– BMF 203K-H- _ _ -C-A_ -S4- _ _,_
– BMF 203K-H- _ _ -C-A_ -S75- _ _,_
– BMF 235K-H- _ _ -C-A_ -PU _ _
– BMF 235K-H- _ _ -C-A_ -S4- _ _,_
– BMF 235K-H- _ _ -C-A_ -S75- _ _,_
This guide is intended for qualified technical personnel.
Read this guide before installing and operating the
magnetic field sensors.
1.2

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are shown with the prefix
0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BMF magnetic field sensor with control element
– Angled screw driver DIN 911 Size 0.9 (BMF 203K-...)
– Cable clip for C-slot (BMF 203K-...)
– Cable clip for T-slot (BMF 235K-...)
– Condensed guide
Cables and other accessories are available on
the Internet at www.balluff.com or may be
requested via e-mail from service@balluff.de.
www.balluff.com
1.4

Approvals and markings

For use in NFPA-79 applications only.
Adapters for field wiring are available from the
manufacturer. Refer to manufacturer's information.
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The magnetic field sensor meets the requirements of the
following product standard:
– IEC 60947-2-5 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Conducted interference induced by
high-frequency fields
EN 61000-4-6
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5 Abbreviations
BDC Binary Data Channel – a switching signal
IODD IO device description
PD Process data
Severity level 2
Severity level 2
Severity level 3
Severity level 3
english 5