Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BTL7-S5 Serie Notice D'utilisation

BTL7-S5_ _(B) -M _ _ _ _ -P-S32/S115/S147/KA_ _/FA_ _
Transducer – Profile Style
1

Notes to the user

1.1 Validity
This guide describes the construction, function and setup
options for the BTL7 transducer with SSI interface. It
applies to types
BTL7-S5_ _(B)-M _ _ _ _ -P-S32/S115/S147/KA _ _/FA_ _
(see Type code breakdown from page 25).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the
transducer.
1.2

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Action instruction 1
Action sequences are numbered consecutively:
1. Action instruction 1
2. Action instruction 2
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BTL7 transducer
– Mounting clamps with insulating sleeves and screws
– Condensed guide
The magnets are available in various models
and must be ordered separately.
1.4

Approvals and markings

UL approval
File no.
E227256
1) Not for BTL7-...-FA_ _
US Patent 5 923 164
The US patent was awarded in connection with this
product.
www.balluff.com
1)
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The transducer meets the requirements of the following
product standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference induced by
high-frequency fields
EN 61000-4-6
– Magnetic fields
EN 61000-4-8
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5

Abbreviations

SSI Synchronous Serial Interface
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3
Severity level 4
english 5