Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BIP LD2-T017-04-BP-S4 Serie Notice D'utilisation

BIP LD2-T017-04-BP _ _ / BP _ _ -S4
Inductive Positioning System
1

Notes to the user

1.1 Validity
This guide describes the construction, function, and setup
options for the BIP inductive positioning system with
IO-Link interface. It applies to types
BIP LD2-T017-04-BP _ _ -S4 and
BIP LD2-T017-04-BP _ _.
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BIP.
1.2

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BIP
– Condensed guide
4 english
1.4

Approvals and markings

UL-Zulassung
File No.
E227256
The CE Mark verifies that our products
meet the requirements of the current EU
Directive (EMC Directive).
The BIP meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Surge
EN 61000-4-5
– Conducted interference
induced by high-frequency
fields
EN 61000-4-6
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
Severity level 3
Severity level 3
Severity level 3
Severity level 2
Severity level 3