Balluff BMF 203K-H Série Notice D'utilisation page 37

BMF 203K-H- _ _ -C-A _ -... / BMF 235K-H- _ _ -C-A _ -...
Magnetic Field Sensors
4
Installation and connection
4.1 Determining the piston position with a rod
magnet
A small, axially polarized rod magnet can be used to
determine the travel path of the cylinder magnet and
therefore the ideal sensor position.
Determining the installation position
1. Apply the rod magnet to the side wall or the groove of
the cylinder so that the magnet is attracted.
Fig. 4-1: Apply the magnet
2. Extend the cylinder rod completely.
⇒ The magnet will move with it.
Fig. 4-2: Extending the cylinder rod
3. Mark the position of the magnet (center of the magnet).
Fig. 4-3: Marking the magnet position
4. Retract the cylinder rod completely.
⇒ The magnet will move with it.
Fig. 4-4: Retracting the cylinder rod
www.balluff.com
5. Mark the position of the magnet (center of the magnet).
Fig. 4-5: Marking the magnet position
6. Mount the sensor in the center between the two marks
(sensor groove).
Fig. 4-6: Mounting the sensor
english 9