Button Functions; Stop Button - Sigma PC 26.14 Guide Rapide

Button functions

3
The PC 26.14 has five buttons:
TOGGLE/-, TOGGLE/+, STOP, START, and ENTER

STOP button:

This button takes you back a level
within the menu structure. In training
mode, stop the training session by
pressing this button.
Resetting training data without
saving: Press and hold the STOP
button.
TOGGLE/- and
TOGGLE/+ buttons:
TOGGLE/+ enables you to navigate to the
right in the main menu; TOGGLE/- takes
you back again. If you are at a point at which
values can be configured, use TOGGLE/+
to set a higher value and TOGGLE/- to set
a lower value.
Activating/deactivating the light mode
Press the TOGGLE/- AND TOGGLE/+
buttons simultaneously. Pressing the
buttons simultaneously a second time
switches the display backlight off again.
The light stays on for approx. three seconds.
12