Connecting The Outputs; Record Player Earth Connection - MC Crypt SA-101 U Notice D'emploi

Table de mixage disco
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connection
CH3 USB (19) connection
You can connect the USB interface of your computer to this input. Your computer can be used as a playback device
as well.
The interface does not support storage media such as harddisks or memory sticks that are not equipped
with a playback function (player).
b) Connecting the outputs
MASTER OUT 1 (15) connection
Connect this output to a free XLR input of your amplifier.
This output offers better signal quality and interference resistance than MASTER OUT 2 (16) and
should therefore be favoured if the amplifier is equipped with both connection types.
MASTER OUT 2 (16) connection
Connect this output to a free RCA input of your amplifier.
REC connection (17)
If you wish to record the output signal of the mixer with a recording device, connect the recording input of the device
to this socket on the mixer.
BOOTH connection (17)
You can connect an additional amplifier to this output to be used in an adjoining room or to provide the signal for
monitor loudspeakers.
PHONES connection (7)
Connect headphones with a 6.3 mm jack plug to this output.
c) Record player earth connection
If your record player has its own earth line (usually a thin, black cable with clamp-type socket), connect it to earthing
screw SIGNAL GND (21). This helps prevent hum trouble.
32

Publicité

Table des Matières
loading

Table des Matières