MC Crypt SA-101 U Notice D'emploi page 28

Connection and control elements
(7) HEADPHONES channel
Here, the headphones channel is controlled.
MONO SPLIT/STEREO switch: Mono split or stereo playback
MIXING control: in CUE position, only the activated CUE channels are played. In MASTER position, only the
MASTER channel is played.
LEVEL control: volume control of the headphones channel
PHONES connection: headphones connection
(8) Channel fader
Level adjustment of the corresponding channel
(9) MASTER fader
Level adjustment of the master channel
(10) CROSSFADER ASSIGN switches
Selection of the two channels to be controlled by the crossfader (12)
(11) Switch for crossfader control characteristics
Adjustment of the control characteristics of the crossfader (12)
Left position: the respective channel is abruptly faded in or out
Right position: the respective channel is softly faded in or out
(12) Crossfader
Control to crossfade between the channels selected with the CROSSFADER ASSIGN switches (10).
One channel is faded out using the slide control while the other channel is faded in. When the CROSSFADER is in
centre position, both channels are played equally.
(13) MASTER BALANCE control
Control to adjust the volume balance between the left and the right signal of the master channel
28