Power On/Off - Haier ESL-T21 Guide De L'utilisateur

Power On/Off

• Push button once to power on the washer.
• If washer is On push button once to shut off the power.
Start/Pause
• Once washer is powered and selections are chosen push this button once to Start
the wash.
• While unit is working push this button once to pause it.
• If unit is in Pause mode, push this button once to resume operation.
Cycle Signal
• Signal volume can be adjusted soft – loud or off.
Temperature Wash/Rinse
• To select inlet water temperature for wash and rinse.
Process Select
This is to select washing process.
• Soak will not work in the Hand Wash, Delicates and Quick cycles.
• Water level indicator will shut off if only Spin is selected.
• Once a program is selected press the Process Select button to have 2nd Rinse. The
washer will add a 2nd rinse.
Delay Start Indicator
• Indicates remaining minutes when cycle is in progress.
• Indicates remaining hours during delay process.
• Indicates faults codes or conditions that are not normal.
English
6