Unpacking Your Washer; Leveling Your Washer - Haier ESL-T21 Guide De L'utilisateur

English

Unpacking Your Washer

• Remove all packing materials. This includes the foam base and all
adhesive tape holding the washer accessories inside and outside.
• Open the top lid to remove the styrofoam drum brace. Pull to remove.
Note: Save drum brace. Reinstall when moving the washer.
• Inspect and remove any remains of packing, tape or printed
materials before using the washer.

Leveling Your Washer

• Your washer has 4 leveling legs; which are located on the four bottom
corners. After properly placing your washer in its final position, you can
level your washer.
• Leveling legs can be adjusted by turning them counterclockwise to raise
your washer or turning them clockwise to lower your washer.
Warning: Leveling of washer is very important to prevent vibration
during spin.
19