Haier ESL-T21 Guide De L'utilisateur page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
6. Soil Level
• When the washer is powered the machine will automatically set at Normal. Select
different soil levels by pressing button.
7. Temperature Wash/Rinse
• Initial setting is Warm/Cold when washer is powered on. Press button to change
selection based on clothes put in the washer.
8. Cycle Signal
• This is set at Low when washer is started. Press button to adjust.
9. Delay Start
• To start the washer at a later lime press the Delay Start button and set the time.
• When activated the indicator displays 2. Push button once for every 1 hour delay
for up to 24 hours
• Press Start button to activate Delay Start.
• When the delay timer starts the program select indicator turns off. The indicator
will display the remaining time to turn on the unit. In the lower right corner of the
display, a blinking light will indicate that Delay Start has been activated.
• By pressing the Delay/Start button the selected Process programs will be
displayed.
• By altering the running program, the washer will have to be reset.
10. Start/Pause
• Press this button when you want the machine to start.
• During operation press this button to pause and press it again to resume opera-
tion.
Note: By opening the top lid will stop the machine except for water filling or
draining.
9

Publicité

Table des Matières
loading

Table des Matières