Oven Light - La Cornue AlberTine 90 Mode D'emploi

English
Fig.2-26
Fig.2-27
Fig.2-28
ArtNo.320-0023
Oven light USA
To Fit a Shelf to the Telescopic Shelf Runners
Slide the telescopic runners forward until they stop. Holding
the shelf above the runners, tilt the front downward and
locate into the front of the runners. Lay the shelf at. Press on
the rear of the shelf to secure in place.
To Remove a Shelf from the Telescopic Shelf Runners
Slide the shelf out on the runners. While holding one of the
runners securely, carefully lift the rear of the shelf upwards:
the shelf will spring clear of the central restraining tab. Repeat
for the opposite side of the shelf.
Note: To aid the removal of the shelf you can insert a suitable
at tool through the opening in the side of the runners and
lever the shelf clear (Fig.2-26).
Tilt the front of the shelf downwards and then lift clear of the
runners (Fig.2-27).
To Remove the Telescopic Shelf Runners
Firstly, remove the shelf as in the 'To Remove a Shelf from the
Telescopic Shelf Runners' section.
Place a nger on the underside of the telescopic runner and
lift.
Open the catch on top of the runner and pull the runner
forward and down to remove.

Oven Light

Press the appropriate button to turn on the oven lights
(Fig.2-28).
If one of the oven lights fail, turn o the cooker circuit breaker
before you change the bulb. See the 'Troubleshooting' section
for details on how to change an oven light bulb.
10