Accessories; Oven Shelves - La Cornue AlberTine 90 Mode D'emploi

Accessories

Oven Shelves

Each cooker is supplied with:
• 1x full capacity telescopic shelf with runners (Fig.2-17)
• 1x full capacity shelf with grill tray and cradle
(Fig.2-18)
1x pastry tray (Fig.2-19)
•
• 3x energy saving shelves (Fig.2-20)
1x divider (Fig.2-21)
•
The oven shelves are retained when pulled forward but can
be easily removed and re tted.
To Remove and Fit a Shelf to the Side Supports
The shelf has a small kink on either side (Fig.2-22). To remove
the shelf, line these up with the stops in the shelf support
(Fig.2-23). Lift the rear of the shelf upward so that it will pass
over the shelf stop and then pull it forward (Fig.2-24).
Re t in the reverse order, making sure to push it fully back.
To Fit the Telescopic Shelf Runners
With the runner arm in the closed position locate the opening
of the upper rear slot onto the side support (Fig.2-25). Do
not locate any further than the opening at this point.
Lift the front of the runner arm to locate the front slot against
the side support (Fig.2-25).
Push the runner arm towards the rear of the oven. The catch
at the front will lift and drop to secure the runner arm in place
(Fig.2-25).
Fig.2-17
Fig.2-19
ArtNo.326-0005 - Pastry tray
Fig.2-21
ArtNo.281-0028 - Albertine divider
Fig.2-23
2
3
9
English
Fig.2-18
Fig.2-20
Fig.2-22
Fig.2-24
Fig.2-25
1