M-system MFI 94 Mode D'emploi page 107

INSIDE OF OVEN
The oven should always be cleaned
after use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm
water. Suitable proprietary chemical
cleaners may be used after first consult-
ing with the manufacturers recommen-
dations and testing a small sample of
the oven cavity.
Abrasive cleaning agents or scouring
pads/cloths should not be used on the
cavity surface.
NOTE: The manufacturers of this
appliance will accept no responsibili-
ty for damage caused by chemical or
abrasive cleaning.
Let the oven cool down and pay spe-
cial attention no to touch the hot heat-
ing elements inside the oven cavity.
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
holes on the side walls inside the
oven (Fig. 6.3).
– Slide the rack into the runners (Fig.
6.4).
The rack must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven (fig.
6.4).
– To dismantle, operate in reverse
order.
Fig. 6.4
Fig. 6.3
107