Changing The Battery; Maintenance; Technical Data; General Conformity Declaration - Selve i-R Marki Send WS Notice D'utilisation

Changing the battery/Technical Data
GB

Changing the battery

Maintenance

Clean the device with a damp cloth only. Do not use a cleansing agent
since this could damage the plastic.

Technical Data

Nominal voltage:
Battery type:
System of protection: IP 20
Permissible
ambient temperature: -10 to +55 °C
Radio frequency:
The maximum radio range is up to 25 m indoors and up to 350 m in
the open.
Subject to technical modifications.

General conformity declaration

The company SELVE GmbH & CO. KG, hereby declares that the
i-R Marki Send WS is in conformity with the basic requirements and
other relevant provisions of the Directive 1999/5/EC. The declaration
of conformity can be seen at www.selve.de.
1. Open the battery compartment door
(remove the cover by pulling it down-
wards).
2. Take out the batteries.
3. Insert the new batteries in the correct
position.
3 V DC
LR 03 (AAA)
868.3 MHz
44