Procedure For Initial Installation - Selve i-R Marki Send WS Notice D'utilisation

Explanation of functions/terms used
GB
Special function radio motor
If the awning is to move downwards when the radio link has been
interrupted, press the DOWN button for 6 seconds.
Hinweis
• In this case, the wind monitoring remains deactivated
Warning!

Procedure for initial installation

Program procedure fort he radio sensor and the i-R Marki Send
WS:
1. Program the i-R Marki Send WS in the receiver.
2. Put the receiver in programming mode by pressing the PROG
button of the already programmed i-R Marki Send WS for
3 seconds. Now the sensory mechanism is programmed in the
receiver by briefly pressing the PROG button on the sensor. Use
the toggle button to check whether programming has been
successful.
i-R Marki Send WS
until the awning is moved to the upper end limit. There
is no protection against wind damage to the awning.
The user has to ensure that personal injuries and
damage to property do not occur.
3 sec.
➡
Sensor
36
1 sec.
✓