Installation - Selve i-R Marki Send WS Notice D'utilisation

Installation

Installation
Note:
Ensure that the controls are not installed and operated in the vicinity
of metal surfaces or magnetic fields. Metal surfaces or panes of glass
with a metallisation within the transmission path can reduce the
range considerably.
Radio sets transmitting at the same frequency could interfere with
reception.
It should be noted that the range of the radio signal is restricted by
legislation and constructional measures.
Installing the wall mount
• Before installing in the position required, check that the transmitter
and receiver are functioning properly.
• Fix the mount to the wall with the two screws provided.
Factory setting
Sun threshold value: Intermediate position = 08
Wind threshold value: smallest value = 01
29
GB