Kenmore 970-6871 Série Guide D'utilisation Et D'entretien page 24

Setting Oven Controls
• Setting Convection Convert Feature
• Setting Add 1 Minute Feature
To set the Convection Convert feature
The CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When set
properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert may ONLY be used with a Bake, Timed Bake or a Delay Start (Delayed Timed Bake) setting. When
used with a Timed Bake or a Delayed Timed Bake setting, the Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (See Fig. 4). At this time the oven control will sound 3 long beeps at regular intervals
until baking has finished. When the bake time has completely finished the control will display "End" and will sound 3 long
beeps every 30 seconds until the
INSTRUCTIONS
Using Convection Convert (Bake) feature to
automatically adjust oven temperature (example
below when setting oven for 350°F):
1. Arrange interior oven racks and place food in oven.
2. Press , "- - - °" will appear in the display (Fig. 1).
3. Press . "BAKE" will flash and "350°" will appear
in the display (See Fig. 2). If a Timed Bake or a Delayed Start
(Delayed Timed Bake) is desired, enter the times now.
4. Press . "CONV BAKE" and the oven temperature
adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven temperature
is reached. The display will show "325°", "CONV BAKE" and
the fan icon (Fig. 3).
Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See rotating fan in Fig. 3).
Press to cancel Convection feature at any time.
Note: The minimum amount of cook time using the Convection
Convert feature with a Timed Bake or a Delay Start (Delayed Timed
Bake) is 20 minutes.
To Set Add 1 Minute Feature
The ADD 1 MINUTE pad is used to set additional minutes to the Minute Timer. Each time the
another minute is added to the Minute Timer if the Minute Timer is already active. If the Minute Timer is not active and the
pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute.
When the Minute Timer reaches the end of the set time, the timer will display "End" and signal 3 long beeps at regular
intervals until is pressed. If a Minute Timer function has ended pressing
For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions.
pad is pressed (See Fig. 5).
24
PRESS
will restart the timer at 1 minute.
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
pad is pressed,