Kenmore 970-6871 Série Guide D'utilisation Et D'entretien page 20

Setting Oven Controls
• Setting Delay Start (Delayed Timed Bake)
Setting Delay Start
The BAKE , COOK TIME
timer of the Delayed Timed Bake will turn the oven ON and OFF at the time you select in advance.
INSTRUCTIONS
To program the oven for a Delay Start (Delayed Timed
Bake) and to shut off automatically (example for
baking at 350°F for 50 minutes and starting at 5:30):
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3. Press . "- - -°" will appear in the display (Fig. 1).
4. Press (Fig. 2). "BAKE" will flash and "350°" will
appear in the display.
5. Press . "BAKE" and "350°" will appear in the display (See
Fig. 3).
6. Press . "TIMED" will flash; "BAKE", "0:00" and "350°" will
appear in the display (Fig.4).
7. Enter the desired baking time using the number pads by pressing
. "TIMED" will flash; "BAKE", "50:00" and "350°" will
appear in the display (Fig. 5). Note: Baking time can be set for any
amount of time from 1 minute to 11 hours and 59 minutes.
8 Press . "TIMED", "BAKE" and "350°" will be displayed (Fig.
6).
9. Press . Enter the desired start time using the number pads
(Fig. 7).
10. Press . When Delay Start starts, the set oven temperature
will disappear, "TIMED", "DELAY", "BAKE" and the current time of
time of day will appear in the display (Fig. 8).
Note: Once Delay Start has started, press
time remaining. Once the Delayed Timed Bake has started baking, a
long beep will sound when the oven temperature reaches the set
temperature.
Press when baking has finished or at any time to cancel the Delay
Start (Delayed Timed Bake) feature.
When the set bake time runs out:
1. "End" and the time of day will show in the display. The oven will
shut off automatically (Fig. 9).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until
NOTE: If your clock is set for normal 12 hour display mode the Delay Start (Delayed Timed Bake) feature can never be set
to start more than 12 hours in advance. To set the Delay Start 12-24 hours in advance see page 13 for instructions to set
the control for the 24 hour time of day display mode.
and DELAY START pads control the Delayed Timed Bake feature. The automatic
to display the bake
is pressed.
PRESS
20
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9