Technical Data - Würth 1952 003 100 Traduction Des Instructions De Service D'origine

DE
GB
FR
Use protective work gloves, protective footwear,
hard hat and safety goggles
NL
Carefully read the instructions provided herein and thoroughly
adhere to all the safety and operating information outlined in
this manual. We recommend you use the equipment properly
ES
and with care, in accordance with the purposes for which it
was designed. The manufacturer assumes no responsibility for
uses other than those specified in this manual. This device is
IT
a tool that was designed to support additional loads and, as
such, must not be used to lift or lower loads.
PT
Use this tool either manually or through the use of manually-
operated wrenches. DO NOT USE THIS TOOL WITH A
PL
PNEUMATIC SCREWER.

TECHNICAL DATA

DA
Body MIN-MAX extension
Side arms MIN-MAX extension
EL
Body + Side arms MIN-MAX
extension
Engine support standard stroke
Tool minimum dimensions
Tool weight
MAX load-bearing capacity
FEATURES
This special all-purpose device allows to support vehicle engines, in
an innovative and secure manner, when you need to disconnect the
engine's supports. It is necessary in all cases in which you have to
remove the engine's supports such as, for example, when changing
the timing belt, the water pump or other auxiliary parts.
Thanks to the support that this special tool is able to ensure to the
engine, you can work on the engine without having to use cables or
lifts for transmission.
ENGINE SUPPORT SPECIFICATIONS
Main structure with telescopic arm that houses the engine support's
adjustable base.
Tool equipped with two swiveling side arms, housing two support feet
designed to ensure stability by leaning securely under the vehicle's
corrugated floor.
METHOD OF PREPARATION
657 to 887 mm
322 to 566 mm
657 to 1170 mm
0 to 190 mm
150x750x300(h) mm
15.10 Kg
400 Kg
1
2
360°
887 MAX
Corsa 230
Stroke 230
937
657 min
374
1170
9