Würth 1952 003 100 Traduction Des Instructions De Service D'origine page 10

Tool equipped with two coupling hooks for secure connection to the
vehicle's frame.
Tanks to the technical features described above, this support can be
applied universally.
ADVANTAGES
- High time saving
- Suitable for a wide range of vehicles
- Rope hoists, gear lifts, etc. are no longer needed
- Quick and easy application of the support
- One mechanic can do the complete job alone and safely
PROCEDURE
• Lift the car using a trolley jack or cranes & stands
(fig. 1).
• Place the tool under the vehicle floor using the two threaded
hooks (fig. 2).
Secure everything under the floor as close as possible to
the engine and then hold the threaded hooks close to the
engine's front base support.
• Turn the knob located under the two threaded hooks, trying to
approach the tool as close as possible to the floor (fig. 3).
• Move the two side arms until you find a safe support under the
floor (fig. 4).
• Place the base support under the engine (fig. 5).
• Depending on the intervention to be carried out, it is advisable
to lower the car and then carry out the job.
It is imperative to anchor the engine to the frame at one or
more points.
10
3
4
5