Sony DSR-25 Mode D'emploi page 61

Submenu
Icon/Menu
(page)
CM SET
ERASE ALL
CM
Setting
Erases all the items in the cassette memory.
If you select this item, one of the following symbols appears. If no cassette is loaded,
nothing is displayed.
: Tape with cassette memory
: Tape without cassette memory
Erase all items in the cassette memory as follows:
1 To erase all items, select OK, otherwise select RETURN. (If you select OK, the unit will
check again to see if you really want to erase all items.)
CM SET
CM SEARCH
TC
CM TITLE DISP
LABEL DISP
DISP
TAPE LABEL
V
,
I TEM ERASE
A
ERASE ALL RETURN
VTR
RETURN OK
ETC
2 To erase all items, select EXECUTE, otherwise select RETURN. (If you select
EXECUTE, the ERASING message will flash, and the unit starts erasing all items in the
cassette memory. While the ERASING message is flashing, you cannot use the J/j
buttons or the EXEC button. After all items have been erased, the COMPLETE message
appears. Press the J/j buttons or the EXEC button to erase the COMPLETE message.)
CM SET
TC CM SEARCH
TITLE DISP
CM
LABEL DISP
DISP
TAPE LABEL
V
,
I TEM ERASE
A
ERASE ALL ERASING
VTR
RETURN
ETC
Note
You cannot erase all the items in the cassette memory in the following cases:
• The unit does not have a cassette inserted or the tape is being unloaded.
• The cassette does not have cassette memory.
• The cassette is write-protected.
• The tape is being recorded.
• The tape is being duplicated.
CM SET
CM SEARCH
TC
TITLE DISP
CM
LABEL DISP
DISP
TAPE LABEL
V
,
A I TEM ERASE
ERASE ALL RETURN
VTR
RETURN OK
ETC
CM SET
CM SEARCH
TC
TITLE DISP
CM
LABEL DISP
DISP
TAPE LABEL
V
I TEM ERASE
A
ERASE ALL COMPLETE
VTR
RETURN
ETC
Chapter 5 Adjusting and Setting Through Menus
CM SET
CM SEARCH
TC
TITLE DISP
CM
LABEL DISP
DISP
TAPE LABEL
V
A I TEM ERASE
ERASE ALL RETURN
VTR
RETURN EXECUTE
ETC
61
(GB)