Bosch BCR1 Mode D'emploi page 107

Cleaning and care
d
46
e
f
1
g
d) Take the brush roller out of the robot vacuum.
e) Use scissors to cut through threads and hairs wound
round the brush and then remove them.
If necessary, carefully vacuum the brush roller with a
vacuum cleaner.
f) Place the brush roller back in the robot vacuum. Make
sure the brush roller is the right way round and lock it
2
in place by pushing it into the robot vacuum.
g) Lower the cable guard and put the robot vacuum back
in its working position.
Note
The robot vacuum will not work without the brush rol-
ler.
en
107