Sharp MD-MT180H Mode D'emploi page 204

Titling a MiniDisc (continued)
MD-MT180H
ENGLISH


To add characters
1
Put the unit in the character input mode.
(Perform steps 1 - 4 on page 27.)
2
Press the VOL+ or VOL- button to move the cur-
sor to the character before which you want to add
a new character.
3
Select the character to add.
(Perform steps 5 - 7 on page 27.)
4
Press the MENU/CHRG button.


"TOC" will be displayed. To write the updated con-
tents to the MiniDisc, press the :OFF/HOLD but-
ton.


You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the re-
corded contents have been updated.
E-29


Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same
order as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
01/10/5 180H_E_5.fm