Using With The Alkaline Battery - Sharp MD-MT180H Mode D'emploi

Using with the Alkaline Battery

If you use the separately available battery case (AD-
M18BC) and the supplied rechargeable battery at the
same time, the MD can play much longer than with only
one source of battery power.
Use one commercially available alkaline battery (LR6,
"AA" size).
Open
2
Press
1
Back of the
portable MD
RELEASE LOCK
When using the alkaline battery, be sure to insert the
rechargeable battery also.
1
Open the case cover.
2
Insert an alkaline battery into the battery case.
3
Attach the battery case to the portable MD.
Caution:


Whilst you are using the rechargeable battery and the
alkaline battery at the same time, do not remove either
of them. If you do, when the unit is in the play mode,
playback will stop. When in the recording mode, the
recorded contents will be erased, and the power may
be disconnected.


Do not replace the battery or the rechargeable battery
during operation.


Do not use rechargeable battery (nickel-cadmium
battery etc.) in the battery case.


If the unit is not used for a long period of time, remove
the battery. (Even if the power is turned off, the battery
will be drained slowly but continuously.)
01/10/5 180H_E_2.fm
MD-MT180H
ENGLISH
E-8