Checking Displays - Sharp MD-MT180H Mode D'emploi

Checking Displays

To check the elapsed time and remaining
time of the track
1
During playback, press the MENU/CHRG button
repeatedly to select "DISPLAY".
2
Press the ENTER/SYNC button.
3
Press the MENU/CHRG button.
Each time the button is pressed, the display will
change as follows.
A
B
C
Track number Elapsed playback time
Track name Remaining playback time
Notes:


If the disc name or the track name was not originally
recorded on the MiniDisc, "NO NAME" will be displayed.


Elapsed playback time and remaining playback time may
be different from the actual time.


The selected display will not change even after the disc is
replaced.


Complete the operation within 7 seconds whilst selecting
the menus.


To check the remaining recording time and
the total playing time
1
Whilst in the stop mode, press the MENU/CHRG
button repeatedly to select "DISPLAY".
2
Press the ENTER/SYNC button.
3
Press the MENU/CHRG button.
Each time the button is pressed, the display will
change as follows.
A
B
D
C
Total number of tracks Remaining recording time
Disc name Total playing time


Remaining recording time varies depending on the set
recording mode.


Remaining recording time will not be displayed with a
playback only MiniDisc.
01/10/5
MD-MT180H
ENGLISH
D
E-24
180H_E_4.fm