Troubleshooting - Sharp MD-MT180H Mode D'emploi

Troubleshooting

MD-MT180H
ENGLISH
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong
with this product, check the following before calling your authorised SHARP dealer or service centre.
The unit does not turn on.


Is the AC adaptor disconnected?


Is the battery exhausted?


Is the unit in the hold mode?


Has condensation formed inside the unit?


Is the unit being influenced by mechanical shock or by
static electricity?
No sound is heard from the earphones.


Is the volume set too low?


Is the earphones plugged in?


Are you trying to play a MiniDisc with data on it instead
of a MiniDisc containing music?
When the operation buttons are pressed, the unit does
not respond.


Is the unit in the hold mode?


Is the battery exhausted?


Is the earphones plug inserted firmly?
E-39
Some sounds are skipped.


Is the battery exhausted?


Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected.


Has the track number or character information been
written on the disc yet?


Is the unit in the recording or editing mode?
Recording and editing are impossible.


Is the MiniDisc protected against accidental erasure?


Is the unit connected properly to the other equipment?


Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?


Is the unit in the hold mode?


Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo sys-
tem.
01/10/5 180H_E_6.fm