Maintenance Plan; Cleaning; Clean The Air Filter; Clean The Spark Plug - Zipper ZI-ELB70 Manuel D'utilisation

15 MAINTENANCE
No cleaning, upkeep, checks or maintenance when machine is running
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Ware safety gloves if you mount or demount drills!
Damaged drills may never be straightened or welded!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance
deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
15.1

Maintenance plan

Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts
Damage of any part of the machine
Damage of drills
Fuel tank of tightness
Machine cleaning
Cleaning spark plug
Cleaning air filter
15.2

Cleaning

Clean the machine and the working attachment from soil, dust, grass, chips, and small twigs, etc.
Clean the machine housing with a wet cloth and a mild cleaning solution.
Put on all coatless flats a thin coat of oil.
The usage of solvents, aggressive chemicals or scouring agents damages the machine housing.

15.2.1 Clean the air filter

A clogged air filter reduces the engines power output drastically and causes engine disfunction.
Furthermore it reduces the engines lifespan!
Loosen with a hex-key the screw fixing the air filter cover (Fig. E).
Take off the cover and remove the filter (Fig. F).
Clean the air filter (Fig G) with water. Wring it out strongly. Let it dry. Drip some drops of oil onto the
filter. Mount the filter back and mount on the cover again.

15.2.2 Clean the spark plug

Take off the spark plug cap (I-2). Loosen and remove the spark plug. Clean it with a small brush from
soot debris.
The contact distance shall account approx. 0, 5mm or ~ credit card thickness.

15.2.3 Carburettor

Carburettor adjustments should be carried out only by trained specialist personnel!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-ELB70 25
A T T E N T I O N
Shut off the machine and let it cool down before start servicing!
N O T I C E
NOTICE
N O T E
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 25 working hours
Every 20-30 working hours
MAINTENANCE
25