Technical Data; Trouble Shooting; Disposal - Cleanmaxx Supreme Mode D'emploi

Technical data

Model number:
Voltage:
Protection class / rating:
Reservoir capacity:

Trouble shooting

Problem
No steam
emerging.
No steam
emerging.
Jets of steam
emerge when
refi lling with water.

Disposal

The packaging material is recyclable. Dispose of the packaging in an environmentally-
friendly manner and make it available for the recyclable material collection-service.
Dispose of the product in an environmentally-friendly manner when you decide to
part with it.
The device does not belong in the household waste. Dispose of it at a recycling
centre for old electrical and electronic appliances.
For more information, please contact the administration in your locality.
02078_DE-GB-FR-NL_V0.indd 20 02078_DE-GB-FR-NL_V0.indd 20
7638
220V-240 V / 50 Hz / 1550 W
I, IPX4
max. 260 ml
Possible cause
• The appliance is not
switched on, or not con-
nected to the mains at the
wall socket.
• The appliance has not yet
heated up.
• The pump is not acti-
vated.
• The water reservoir is
empty.
The water is forming
condensation in the tube.
The appliance is still too hot.
20
Solution
• Check that the appliance is con-
nected to the mains supply at a wall
socket, and that it is switched on.
• The appliance needs to heat up for
around 60 seconds before the steam
can emerge.
• The shaft (and the housing) need to
be slightly inclined towards the fl oor
so that the pump activates and steam
can emerge.
• Fill the water reservoir.
Tilt the appliance until steam emerges. If
necessary place a cloth underneath the
cleaner base.
Allow the appliance to cool down
completely before refi lling the water.
29.09.09 10:18 29.09.09 10:18