Tronic TLAL 2 A1 Mode D'emploi page 19

Insert the car charger adapter into the
♦
12/24 V connection of your car. This
is usually the vehicle socket (cigarette
lighter) on the dashboard of your vehicle.
Many vehicles have a second socket
by the rear seats or in the boot. 24 volt
batteries are often used in lorries or on
boats.
The operating LED 3 lights up white to
♦
signal that the car charger adapter is
being supplied with power. The operating
LED 3 also lights up if no device is
connected. Depending on the vehicle
type, it is possible that the ignition has
to be switched on first.
Connect your device to the car charger
♦
adapter. Use the original USB cable
supplied with your device to optimise
the charging process.
If required, you can switch your connected
♦
device on for further use.
│ GB │ IE
■ 16 TLAL 2 A1