Trebs Comfortjuicer 99349 Mode D'emploi page 21

TECHNICAL POSSIBLE FAILURES
Problem
No light
All light in red color
Turn the wheel, but
cannot choose the menu.
Machine sounds 'Be-be-
be'
Motor has stopped
Leaking from juicing jar.
Cannot vacuum
DISPOSAL OF THE OLD DEVICE
Old electric and electronic devices frequently still contain valuable materials. However, they also contain
damaging substances, which were necessary for their functionality and safety. If these were put in the non-
recyclable waste or were handled incorrectly,
they could be detrimental to human health and the environment. Therefore, do not put your old device into the non-
recyclable waste under any circumstances.
PLEASE NOTE

Utilize the collection point, established in your town, to return and recycle old electric and electronic devices. If
necessary, contact your town hall, local refuse collection service or your dealer for information.

Ensure that your old device is stored safely away from children until it is taken away.
GUARENTEE

We provide a 24 month guarantee for this product, commencing from the date of sale, for faults

which are attributable to production or material faults.

The guarantee does not include damages, which were incurred as a result of improper handling or use, as well as
malfunctions which only have a minor effect on the function or the value of the device. Consumables, transit
damages, inasmuch as we are not responsible for these, as well as damages, which were incurred as a result of
Possible Causes
Machine is not plugged in
The flip is not closed
The juicing or vacuum jar is not
installed at the right position
Might be 1 cycle finished
1.The jar cover will not install in
place
2.The cap or seal ring is broken
1. The cap, blade and lid are not
installed in place
2. The cap, blade and lid are
broken
3.The flip is not covered well
What To Do
Check the machine is plugged in
Open and close the flip again.
Re-install the juicing jar again, make sure the
handle of it is pointed to the 'Lock' Symbol.
Press 'Start/Stop' again to run the machine.
1.Ensure the jar and main body assemble
well
2.Ensure all parts of the jar are install well
3. Ensure the seal ring or cap is well.
1.Ensure the seal ring is well.
2.Ensure all parts of the jar are install well
3.Close the flip.
21