Trebs Comfortjuicer 99349 Mode D'emploi page 18

3. Plug in; all lights of the panel will switch on. Make sure the lights are all in white color (If they are all flash
red, it means the flip is not at the right position, then please open it and re-close).
4. Turn the wheel of 'start/stop' to choose the menu you prefer, then press 'Start/Stop' to run it.
:
Note 1/ If you want to stop the machine immediately, just press 'Start/Stop' again.
2/ When at 'Pulse' position, you should keep press 'Start/Stop' to run the machine, and when your finger
remove, it will stop immediately.
3/ If you turn the wheel of the 'Start/Stop' but the 'Vacuum lights' keep flashing, and machine sounds
'Be-be-be', it means the juicing jar is not installed at the right position. You should re-install the juicing
jar again and make sure the jar handle must in line with the 'Lock' symbol.
4/ If you didn't operate the machine more than 5 min after plug in, the machine will start 'Energy save'
mode, press the 'Start/Stop' to activate it.
5. After finishing the juicing, press the safety switch to release the flip, twist the juicing jar until the handle
points to the 'Unlock' symbol. Take out the juicing jar, lift the cap to release the vacuum (or else you can't open
the lid), and you can open the lid easily and enjoying you juice!
Tips:
In order to protect the machine, the menu will set a circle. When one circle finished it will stop, if you juicing
tough food materials, we suggest you to run 'High' menu once more in order to chop the materials completely.
18