GreenWorks Tools 2600007 Manuel D'utilisation page 2

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Power voltage
No-load speed
Working width
Net weight
Maximum launch
distance
A = Length
B = Height
C = Width
Measured sound power
level
Guaranteed sound
power level
Sound pressure level
Maximum vibration
Battery
Battery charger
DESCRIPTION
1. Upper handle
2. Starter lever
3. Lower handle
4. Chute adjustment handle
5. Transport handle
6. Middle handle
7. Ignition key
8. Discharge chute
9. Deflector
10. Auger
11. Auger compartment
12. Wheel
13. Lower blade
14. Battery compartment
15. Trigger
16. Upper chute control rod
17. Lower chute control rod
18. Spring pin
English (original instructions)
40 V
1900 ± 10% rpm
50,8 cm
17,2 kg
5,5 m
1135 mm
940 mm
525 mm
94,9 dB(A)
96 dB(A)
68 dB(A), K=3.0 dB(A)
﹤ 2.5 m/s², K=1.5 m/s²
29727/29717
2910907
19. Cam locks
20. Bolt
21. Handle knob
22. Keyed hole
23. Coupling hole
24. Latching tab
25. Slot
26. Post
27. Battery
28. Led light
29. Switch
Use of any other battery packs may result in a risk of
fire, electric shock, or injury to persons.
KNOW YOUR SNOW THROWER (See figure 1-3)
The safe use of the product requires an understand-
ing of the information on the tool and in this operator's
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize your-
self with all operating features and safety rules.
Ignition key
Used to start and stop the motor. The ignition key has
two positions.
„ Key removed - OFF - the motor stops and cannot
be restarted.
„ Key inserted - ON - the motor can start and run.
Starter lever
Used to start and stop the motor.
„ Start: Press the ignition key and pull the starter
lever.
„ Stop: release the starter lever.
Starter lever lock
It prevents accidental activation of the starter lever.
Press the ignition key to release the starter lever.
Discharge chute adjustment handle
This controls rotation of the discharge chute so that
snow discharge can be aimed in the required direction.
Turn the handle clockwise/anti-clockwise to adjust the
chute.
Led light switch
To turn the headlamps on, push the switch forward.
ON: press the switch
OFF: release the switch
1
WARNING