Display Items; Repeat And Shuffle Play; Radio; Storing And Receiving Stations - Sony CDX-RA650 Mode D'emploi

CD
For details on selecting a CD/MD changer, see
page 12.

Display items

Example: when you select the normal play mode
by pressing (IMAGE) repeatedly (page 6).
A
A Source, MP3/WMA/ATRAC3plus indication
B Clock
C Track number/Elapsed playing time, Disc/
artist name, Album/group number*
group name, Track name, Text information*
*1 Album/group number is displayed only when the
album/group is changed.
*2 When playing an MP3, ID3 tag is displayed, when
playing ATRAC CD, text information written by
SonicStage, etc., is displayed, and when playing
WMA, WMA tag is displayed.
To change display items C, press (DSPL);
scroll display items C, press (SCRL) on the
card remote commander or set "Auto Scroll on"
(page 12).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3/
WMA, see page 14; ATRAC CD, see page 15.

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
Repeat Track
Repeat Album*
1
Repeat Group* 2
Shuffle Album*
1
Shuffle Group* 2
Shuffle Disc
*1 When an MP3/WMA is played.
*2 When an ATRAC CD is played.
To return to normal play mode, select "Repeat
off" or "Shuffle off."
8
B
C
1 , Album/
To play
track repeatedly.
album repeatedly.
group repeatedly.
album in random order.
group in random order.
disc in random order.

Radio

Storing and receiving stations

Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press and hold (BTM) until "BTM"
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
2

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Tip
When a RDS station is stored, the AF/TA setting is
also stored (page 9).

Receiving the stored stations

1
Select the band, then press a number
button ((1) to (6)).

Tuning automatically

1
Select the band, then press the
M>/.m control up or down to
search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold the M>/.m control
to quickly locate the approximate frequency, then
press the M>/.m control up or down
repeatedly to fine adjust to the desired frequency
(manual tuning).