5. Push the infant car seat
firmly into the vehicle seat
while removing all slack
from the vehicle belt.
ü Check that the vehicle belt is tight and that the
ü Check that the recline angle is correct. The proper
ü Check that the vehicle belt is not twisted and that it
ü Check that the infant car seat handle is rotated and
B Safe Can MPP user guide.indb 25
Carrier Only Installation with Lap Belt
CHECKLIST
infant car seat is secure. The infant car seat is
secure when it moves less than 2.5 cm (1 inch)
front-to-back or side-to-side at the vehicle belt path.
recline angle is achieved when the level line on the
shell is level to the ground.
is tight and locked.
locked into position 1. See page 33.
B-SAFE 35 User Guide
25
1/30/2015 5:11:54 PM