Timex IRONMAN Classic 50 Move+ Manuel D'instructions page 17

THE TIMEX CONNECTED APP
INSTALLING THE TIMEX CONNECTED PHONE APP
The TIMEX Connected app requires the following OS:
Android: 4.4.2 or higher, NFC capable device or Bluetooth Smart compatible
iOS: iOS 8.1.2 or higher, Bluetooth Smart compatible
The TIMEX Connected app provides the easiest and most convenient method to setup and configure
your TIMEX IRONMAN Classic 50 Move+.
Download and install the TIMEX Connected app for iOS from the iTunes app store, or for Android, from
the Google Play app store.
FIRST TIME PAIRING
Your TIMEX IRONMAN Classic 50 Move+ is equipped with two antennas, NFC (Near Field
Communication) and Bluetooth Smart (Bluetooth Low Energy). You can use either method to connect
your watch to the TIMEX Connected app.
NFC is the most reliable and easiest way for Android users to connect to the TIMEX Connected app; your
watch needs to be very close to the NFC antenna in your phone to connect.
Bluetooth Smart is another option available for pairing a TIMEX IRONMAN Classic 50 Move+ to a mobile
device. Bluetooth Smart has an operating range of approximately 100 feet (30 meters) and is available
on iOS and Android devices.
To connect your Classic 50 Move+ to your mobile device:
1. Open the TIMEX Connected app on your phone.
2. Accept the Privacy and EULA policies.
3. Select the Classic 50 Move+.
4. Select your preferred Sync mode:

NFC

Bluetooth Smart
NFC SYNC
5. Select NFC from the Sync Mode options.
6. Hover your Classic 50 Move+ around the back of your Android device; remember the watch has
to be very close to the NFC antenna to connect.
7. A pairing window will appear and the watch will create an audible tone, do not move the watch
from that location until the status bar on the app fills in (which signifies the connection is
established).
8. In the 'Synchronize' pop-up window, select Keep Watch Settings or Keep App Settings.
® ®
TIMEX IRONMAN Classic 50 Move+ Owner's Manual Page 16