Changing The Opening Direction Of The Doors - SEVERIN KS 9770 Notice D'utilisation

GB

Changing the opening direction of the doors

It is recommended that changing the opening direction of the doors should be done with a helper. You will need
two spanners No. 8 and No. 10 and a Philips head screwdriver.
! When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator horizontally. Do the
actions below in the order they are listed:
WARNING! Turn off the appliance and pull the plug out of the electricity supply socket.
1. Remove the covers c from the body of the refrigerator and of the inner side of the door. Also remove the
upper bracket 6 together with the nut and washers and the spacer under the bracket.
2. Remove the door of the refrigeration compartment. Remove the stopper 5 from the bottom of it. On the
other side of the door, attach the stopper intended for doors that open on the left (you will find it in the
packet). Remove the middle bracket 4 together with the washers on the axle and the plastic spacer.
3. Remove the freezer compartment door 3. Remove the bottom cover 1.
4. Remove the bottom bracket 2 together with the washers on the axle and the plastic spacer. Unscrew the axle
with the washers and screw it into the aperture provided on the other side.
5. Remove the bottom bracket 7 and in its place attach the other bottom bracket 2 together with the washers on
the axle and the plastic spacer. Fix this bracket 7 in place of the other bracket 2.
6. Remove the covers 8 from the partition separating the refrigeration compartment from the freezer
compartment and place them in the apertures on the other side.
7. Remove the covers 9 from the doors of the refrigeration compartment and the freezer compartment and
place them in the apertures on the other side. Hang the freezer compartment door on the axle of bracket 2.
8. Turn bracket 4 around 180° together with the washers on the axle and the plastic spacer, transferring the
washers to the axle on the other side of the bracket. Once the bracket is attached to the freezer
compartment door, fix it in place on the other side of the refrigerator.
9. Hang the refrigeration compartment door on the axle of bracket 4.
10. Turn the bracket 6 around 180° together with the washers on the axle and the plastic spacer. Remove the
axle and the washers and reattach them on the other side of the bracket. Once the bracket 6 is attached to
the refrigeration compartment
apertures. Use the covers c to cover the bracket and the remaining space.
door, fix it in place on the other side of the refrigerator in the uppermost
33