Changing The Door Hinge - SEVERIN VKS 8806 Mode D'emploi

Changing the door hinge

1. Unscrew the two screws that fix the device
cover from behind. Remove the device
cover and put it away (Fig. 1).
2. Remove the four screws from the top of
the device and remove the top door hinge
(Fig. 2).
3. Raise the door a bit and detach it from the
lower hinge. Place the door in a safe area.
4. Tilt the device slightly backwards and
unscrew the adjustable front feet of the
appliance.
5. Unscrew the screws that hold the bottom
door hinge in place and remove the door
hinge. Remove the nut that secures the piv-
ot bolt, remove the pivot bolt from opening
q and insert it in opening w. Secure the
pivot bolt again with the nut (Fig. 3).
Screw down the door hinge and the feet
back on the other side.
6. Place the door on the pivot bolt of the bot-
tom door hinge and press it lightly against
the device.
Insert the top door hinge with the pivot bolt
in the socket on the top of the door and
secure it with the two screws. Screw the
other two screws back in on the other side.
(Fig. 4).
7. Replace the device cover and screw it tight
with the two screws (Fig. 5).
- 23 -