Understanding Built-In Cd Player Error Messages - Pioneer DEH-P4400 Mode D'emploi

Section
Additional Information
09
Understanding built-in CD player
error messages
When problems occur during CD play an error
message may appear on the display. If an error
message appears on the display refer to the
table below to see what the problem is and the
suggested method of correcting the problem. If
the error cannot be corrected, contact your
dealer or your nearest Pioneer Service Center.
Message
ERROR-11, 12,
17, 30
ERROR-11, 12,
17, 30
ERROR-14
ERROR-10, 11,
12, 14, 17, 30,
A0
ERROR-44
HEAT
36
En
Cause Action
Dirty disc Clean disc.
Scratched disc Replace disc.
Blank disc Check the disc.
Electrical or Turn the ignition
mechanical ON and OFF, or
switch to a
different source,
then back to the
CD player.
All tracks are Replace disc.
skip tracks
CD player over- Turn off the CD
heated player until the
CD player cools
down.
Message