Built-In Cd Player; Playing A Cd - Pioneer DEH-P4400 Mode D'emploi

Section

Built-in CD Player

04

Playing a CD

These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 15.
1
TRACK NUMBER
Shows the track currently playing.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press
OPEN to open the front panel.
CD loading slot appears.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
button
CD EJECT
• You can eject a CD by pressing
14
En
1 2
indicator
CD loading slot
CD EJECT
3 Close the front panel.
• After a CD has been inserted, press
to select the built-in CD player.
4 Use
VOLUME
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press
and hold 2 or 3 .
6 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
CD EJECT
the disc for damage before inserting the disc
again.
.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 36.
• The Built-in CD player is not equipped with CD
TEXT function.
• A CD TEXT disc is a CD featuring recorded text
information such as Disc Title, Artist Name
and Track Title.
SOURCE
to adjust the sound level.
to eject the disc, and check
ERROR-14
may