Residual Risks - Güde GGH 10 L Traduction Du Mode D'emploi D'origine

ENGLISH
22

Residual risks

Danger of injury !
Electrical residue risk
Direct/indirect electrical contact may lead to
electric shock. The appliance is to be operated
only in electrical networks with protective RCD.
Thermal residual risks
Burns; Touching the protective grille or housing
body can cause burns. Avoid these parts.
Despite compliance with all relevant building
regulations, there still can be some threats during
operation.
RISKS RELATED TO MATERIALS AND OTHER
SUBSTANCES
Contact / inhalation:
Inhalation of propane or butane may cause
damage to health.
Make sure that all connections are tight and use
the machine outdoors.
During the operation of the heater (space he-
ater), a large amount of oxygen is consumed,
which may lead to a lack of oxygen in small
rooms.
Fire or explosion:
The highest fire and explosion hazard is
around flammable substances.
Leave a space of at least 60 cm on all sides! Do not
operate the machine near flammable substances.
Not to be used for drying textiles or other flam-
mable materials.
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Consider the environmental effects
Do not expose the machine to rain. Do not use the
machine in a humid or wet environment. Ensure good
lighting. Do not use the machine near flammable
liquids or gases (except materials necessary for opera-
tion - propane/butane in this case).
Keep other persons away!
Do not allow other persons, especially children, to
touch the machine or the cable. Keep them away
from the place of use.
Proper storing!
Machines not being used must be kept in a dry,
closed place and out of reach of children.
Do not overload your machine!
You will work better and safer within the given scope
of performance.
Use the right machine!
Do not use tools and devices for purposes for which
they have not been designed.
Secure the machine!
Attach the machine properly, as described in "Assem-
bly/Installation".
Treat your machine with care!
Follow the maintenance regulations and instructions.
Regularly check the machine cable and have it re-
placed by a recognised expert if damaged. Regularly
check the extension cables and have them replaced if
damaged. Keep the handles dry and without any oil
or grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the machine when you are
tired.
Check the machine for any damage!
Before using the machine, check carefully the protective
equipment or slightly damaged parts if working perfectly
and as designated. Check the moving parts if working
perfectly and if not jammed or damaged. To ensure safe
operation of the machine, all parts must be installed
properly and meet all the relevant conditions. Damaged
protective equipment and parts must be professionally
repaired or replaced by a specialised workshop, unless
otherwise provided in the Operating Instructions. Have
any damaged switches replaced in an authorised service
centre. Do not use machines where the switch cannot be
turned on and off.
Warning!
Using other accessories may lead to a risk of injury.
Have your machines repaired by a professional!
This machine meets the relevant safety regulations.
Repairs may only be executed by a professional, using
original spare parts, otherwise the user could get injured.
Safety instructions Gas Turbine
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
The machine must be plugged to 230 V with 16
A fuse.
Switch the machine off and unplug it when unattended.