English; Care And Maintenance; Technical Data | Symbols - Weller WLIR30 Traduction De La Notice Originale

EN

ENGLISH

requirements necessary to guarantee troublefree operation
of the unit.
Use the correct tool. Use only accessories or auxiliary de-
vices which are included in the list of accessories or appro-
ved for use by the manufacturer. Use WELLER accessories
or auxiliary devices on original WELLER equipment only. The
use of other tools and other accessories can cause injury.
Secure the workpiece. Use clamping fixtures to hold the
workpiece.
Use a solder fume extraction unit. If appliances for
connecting solder fume extraction units are available,
ensure that they are connected and used properly.
Specified Conditions Of Use
Use the soldering iron exclusively for the purpose
indicated in the Operating Instructions of soldering
and desoldering under the conditions specified here.
The soldering iron may only used in combination with
Weller Supply Units.
The unit must not be exposed to temperatures above
50°C, naked flame or condensed solvents. Protect
against moisture and direct sunlight.

Care and maintenance

WARNING
Before doing any work on the
machine, pull the plug out of the socket.Leave the unit to
cool down.
Use original
replacement
parts only.
WARNING Risk of burns
Only replace solder tips when cold
•
The soldering tool must be left switched off in the
safety rest for at least 3 minutes until the soldering tip
has cooled down.
Warranty
Claims by the buyer for physical defects are time-barred
after a period of one year from delivery to the buyer. This
does not apply to claims by the buyer for indemnification in
accordance with §§ 478, 479 BGB (German Federal Law
Gazette).
8
If the supply cord is damaged, it
must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
We shall only be liable for claims arising from a warranty
furnished by us if the quality or durability warranty has been
furnished by use in writing and using the term „Warranty".
The warranty shall be void if damage is due to improper use
and if the device has been tampered with by unauthorised
persons.
For more information please visit
www.weller-tools.com.
Symbols
Read the operating
instructions!
Caution!
Disposal
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2012/19/EU on waste
electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their
life must be collected separately and returned
to an environmentally compatible recycling
facility.
Technical Data
Soldering iron
High temperature Limit °C
High temperature Limit °F
Power consumption
Mains supply voltage
Tip type series
LED Lights
Subject to technical alterations and amendments.
Soldering iron
High temperature
Limit °C
High temperature
Limit °F
Power consumption
Mains supply voltage
Tip type series
LED Lights
Subject to technical alterations and amendments.
CE mark of
conformity
Warning! Risk
of burns
WLIR30 WLIR60
400 °C 425 °C
750 °F 800 °F
30 W 60 W
230 V / 50 Hz
4 mm (5/16 ") 6 mm (1/4 ")
Yes
WLIR80 WLIRPK80
485 °C 485 °C
900 °F 900 °F
80 W 80 W
230 V / 50 Hz
10 mm (3/8 ") 10 mm (3/8 ")
Yes No