Explanation of functions
Outputs
Connect the drive to the outputs of the device. The arrows on the device show
the direction in which the drive turns.
Light
A bridge between L and the encoder terminal
time from 120 seconds (
Blind (
)
A bridge between L and the encoder terminal
radio receiver in touch mode. If you hold the travel button down for longer than
1 second, the blind travels in maintained operation. The running time is 180
seconds, instead of the 120 seconds for roller shutters.
Individual inputs
These connecting terminals are intended for an additional button. If a travel
button is pressed for more than 0.5 seconds, the shading solution runs in the
desired direction as far as the limit position. If the travel button is pressed for
less than about 0.5 seconds, the shading solution stops.
) to limitless (
Ind.
Ind.
allows you to set the running
).
allows you to operate the
29 - en