Fitting The Surface -Mounted Radio Receiver - Becker Centronic VarioControl VC420-II Notice De Montage Et D'utilisation

Fitting the surface -mounted radio
receiver
Turn the screws on the housing into
the 0 position, and remove the cover.
Fasten the surface-mounted housing
to the wall using 4 screws that are
suitable for the nature of the wall.
Use a suitable cylindrical tool to pen-
etrate the cable insertion membrane.
Make sure as you insert the connect-
ing cable that it sits tightly against
the membrane.
70mm Ø5mm
30 - en