Technical Data For The Surface-Mounted Radio Receiver; What To Do If - Becker Centronic VarioControl VC420-II Notice De Montage Et D'utilisation

Technical data for the surface-
mounted radio receiver
Degree of protection
Permissible ambient temperature
Type of mounting
For cable diameter
Dimensions (W x H x D)
Problem
Drive is not functioning.
Drive is running in the wrong direc-
tion.
The radio receiver does not perform
manual run commands.
The radio receiver does not perform
automatic run commands.
Intermediate position I / II cannot be
programmed.
44 - en
IP 55
-25 to +55 °C
Surface mounted
dia. 3 - 12 mm
84 x 84 x 41 mm

What to do if...?

Check connection.
Swap the
receiver.
Program transmitter.
Connect the external button cor-
rectly.
Program transmitter.
Set the transmitter's slide switch to
Automatic mode.
Delete intermediate position I / II and
reprogram.
Remedy
and wires at the radio