Becker Centronic VarioControl VC420-II Notice De Montage Et D'utilisation page 40

Intermediate position II
Application
Roller shutter operation
Awning operation
This function allows you to open the shading solution from
the lower limit position until the desired intermediate posi-
tion II is reached. Both limit positions must be set before the
intermediate position II is set.
Setting the intermediate position II
Move the shading solution from the lower limit position to the desired interme-
diate position II.
Press the STOP button and, within 3 seconds, also press the UP button and
hold the two buttons down.
▻ The receiver confirms.
► The intermediate position II is now saved.
Checking the intermediate position II
Press the UP button twice within one second.
► The shading solution runs to the intermediate position II.
Deleting the intermediate position II
Move the shading solution to the intermediate position II.
Press the STOP button and, within 3 seconds, also press the UP button and
hold the two buttons down.
▻ The receiver confirms.
► The intermediate position II is now deleted.
40 - en
Function
Ventilation
Fabric tension