Other Information; Bluetooth Connectivity; Connectivity Troubleshooting - Salora 55UHC9102MS Mode D'emploi

• You must change your modem's SSID when there are
any other modems around with the same SSID. You
can encounter connection problems otherwise. Use
a wired connection if you experience problems with a
wireless connection.
Configuring Wireless Device Settings
Open the Network Settings menu and select Network
Type as Wireless Device to start connection process.
Press the YELLOW button to scan the wireless
networks. A list of available networks will be displayed.
Please select your desired network from the list.
Note: If the modem supports N mode, you should set
N mode settings.
If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via the navigation
buttons and the OK button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network highlight "Network
Type" and press OK.
You can navigate between menu tabs by pressing left/
right buttons. The help bar on the bottom of the dialog
shows features that you may use. Press the BLUE
button to check your internet connection speed. Press
the GREEN button to switch to advanced mode and
then press the OK button to edit settings.
You can check the signal strenght by using the network
settings menu for the wireless device mode.

Other Information

Configuration Status: Displays Wi-Fi status as
connected or not connected.
IP Address: Displays the current IP address.
Network Name: Connected networks' name will be
displayed.
Delete Saved Wi-Fi Profiles
Saved profiles will be deleted if you press the RED button
while the wireless device selection OSD is on the screen.
Connecting to your mobile device via WiFi
• If your mobile device has WiFi feature, you can connect
it to your TV via a router, in order to access the content
in your device. For this, your mobile device must have
an appropriate sharing software.
• Connect to your router following the steps stated above
in the "Wireless Connectivity" section.
• Afterwards, engage your mobile device with the router
and then activate the sharing software on your mobile
device. Then, select files that you want to share with
your TV.
• If the connection is established correctly, you will be
able to access the shared files from your mobile device
via the Media Browser of your TV.
• Enter the Media Browser menu and the playback
device selection OSD will be displayed. Select your
mobile device and press the OK button to continue.
• If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile devices.

Bluetooth Connectivity

Your TV supports Bluetooth technology. A pairing
is required before using the Bluetooth devices with
the TV set. You should do the followings to pair your
device with the TV:
*Set the device to pairing mode
*Start device discovery on the TV
Note: Refer to the user manual of the Bluetooth device to
learn how to set the device to pairing mode.
You can connect audio devices or remote controllers
via Bluetooth to your TV. For audio devices you should
use the Audio Link option in the System>Sound
menu, for remote controllers the Smart Remote
option in the System>Settings>More menu. Select
the menu option and press the OK button to open
the related menu. Using this menu you can discover
and connect the devices that use Bluetooth wireless
technology and start to use them. Follow the on-
screen instructions. Start the device discovery. A list
of available bluetooth devices will be displayed. Select
the device you want to connect from the list and press
the OK button to connect. If "Device connected"
message is displayed, the connection is successfully
established. If the connection fails try it again.
Note: Bluetooth and Wireless LAN devices operate within
the same radio frequency range and may interfere with one
another. To improve the performance of your Bluetooth device
place it at least 1 meter away from any other Bluetooth or
Wireless LAN devices.

Connectivity Troubleshooting

Wireless Network Not Available
• Ensure that any firewalls of your network allow the
TV wireless connection.
• Try searching for wireless networks again, using the
Network Settings menu screen.
If the wireless network does not function properly,
try using the wired network in your home. Refer to
the Wired Connection section for more information
on the process.
If the TV does not function using the wired connection,
check the modem (router). If the router does not
have a problem, check the internet connection of
your modem.
English - 52 -