Media Browser Menu - Salora 55UHC9102MS Mode D'emploi

Instant Recording
Press (RECORD) button to start recording an
event instantly while watching a programme. You can
press (RECORD) button on the remote control
again to record the next event on the EPG. In this
case, an OSD will be displayed, indicating the
programmed events for recording. Press
button to cancel instant recording.
You cannot switch broadcasts or view the Media
Browser during the recording mode. While recording
a programme or during the timeshifting, a warning
message appears on the screen if your USB device
speed is not sufficent.
Watching Recorded Programmes
Select the Recordings Library from the Media
Browser menu. Select a recorded item from the list (if
previously recorded). Press the OK button to view the
Play Options. Select an option then press OK button.
Note: Viewing main menu and menu items will not be available
during the playback.
Press the (STOP) button to stop a playback and
return to the Recordings Library.
Slow Forward
If you press the (PAUSE) button while watching
recorded programmes, the slow forward feature will be
available. You can use
Pressing button consecutively will change slow
forwarding speed.
Recording Configuration
Select the Recording Configuration item in the
System>Settings menu to configure the recording
settings.
Format Disk: You can use the Format Disk feature
for formatting the connected USB disk. Your pin is
required to use the Format Disk feature.
Default PIN can be set to 0000 or 1234. If you
Note:
have defined the PIN(is requested depending on the
country selection) during the First Time Installation
or changed the default PIN later from the Set PIN
option under the Parental Settings menu, use the
PIN that you have defined.
IMPORTANT: Formatting your USB drive will erase
ALL the data on it and it's file system will be converted
to FAT32. In most cases operation errors will be fixed
after a format but you will lose ALL your data.
If "USB disk writing speed too slow to record" message
is displayed on the screen while starting a recording,
try restarting the recording. If you still get the same
error, it is possible that your USB disk does not meet
the speed requirements. Try connecting another
USB disk.
(STOP)
button to slow forward.
English - 40 -

Media Browser Menu

You can play photo, music, and movie files stored
on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing the MENU button
again will exit from this screen. You can set your Media
Browser preferences by using the Settings Menu.
Loop/Shuffle Mode Operation
Start playback with and
activate
Start playback with OK and
activate
Start playback with OK/
and activate
Quick Menu
The Quick Settings menu allows you to access some
options quickly. This menu includes Power Save Mode,
3D Mode, Virtual 3D, Picture Mode, Favourites, Sleep
Timer, FollowMe TV, FollowMe TV to DMR , CEC RC
Passthrough and Information booklet options. Press
Q.MENU button on the remote control to view the quick
menu. See the following chapters for details of the listed
features.
FollowMe TV (Optional)
With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe
TV feature. Install the appropriate Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note: This application is not compatible with all mobile devices.
FollowMe TV to DMR (Optional)
This feature allows video streaming from your TV to
mobile devices using proper applications (e.g. UPnP -
Universal Plug and Play - applications like BubbleUPnP)
or to another TV. Activate FollowMe TV to DMR from the
System>Settings>More menu and timeshifting starts.
Start the application on your device and select your TV.
To stream to another TV press the Red button on the
remote after starting a timeshift recording by pressing
the Pause button on the remote. Device selection menu
will be displayed. Choose the receiver TV and press OK.
Note: FollowMeTV and FollowMe TV to DMR features require
a connected USB storage device with FAT32 format and enough
space in it. Media Renderer option in the More menu should be
set as Enabled. HD channels are not supported and both of the
devices must be connected to the same network.
TV plays next file and loop
the list.
The same file will be
played in a loop (repeat).
The file will be played in a
shuffle.