Marmitek GIGAVIEW 821 Guide De L'utilisateur page 4

3. INSTALLATION
3.1 GigaView 821 Transmitter connections
1. Connect max. 2 HD devices (HDMI OUT) via an HDMI cable to your GV821 Transmitter
(HDMI IN).
2. Connect your HDTV or HD Projector (HDMI IN) via an HDMI cable to the GV821 Transmitter
(HDMI OUT) in order to use the inbuilt loop-through function.
3. Connect the Power Supply included in delivery to the DC IN on the GV821 Transmitter and
to a socket.
3.2 GigaView 821 Receiver connections
1. Connect your HDTV or HD Projector (HDMI IN) via the HDMI cable supplied to the GV821
Receiver (HDMI OUT).
2. Connect the Power Supply included in delivery to the DC IN on the GV821 Receiver and to
a socket.
Note: Use the 2 plugs and 2 screws if you wish to attach the GV821 Receiver to the
wall (e.g. behind your HDTV).
4
DC IN
HD Projector
HD Media Player
Blu-Ray Player
HDTV
MARMITEK