Special Safety Instructions - Scheppach DP16VL Traduction Des Instructions D'origine

20. Warning
■ The use of any other accessory or attachment
other than recommended in this operating
instruction or the Scheppach catalog may
present a risk of personal injury.
21. Have your tool repaired by an expert
■ This electric appliance is in accordance with
the relevant safety rules. Repairing of electrical
appliances may be carried out only by experts
otherwise it may cause considerable danger
for the user.
Attention: Laser radiation
Do not stare into the beam
Class 2 laser
0
Protect yourself and you environment from ac-
cidents using suitable precautionary measures!
• Do not look directly into the laser beam with un-
protected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards reflecting sur-
faces and persons or animals. Even a laser beam
with a low output can cause damage to the eyes.
• Caution - methods other than those specified here
can result in dangerous radiation exposure.
• Never open the laser module. Unexpected expo-
sure to the beam can occur.
• If the machine is not used for an extended period
of time, the batteries should be removed.
• The laser may not be replaced with a different
type of laser.
Repairs of the laser may only be carried out by
the laser manufacturer or an authorised repre-
sentative.
Workplace safety
• Provide a secure and firm base for the machine.
Attach the machine to a base plate or on a work
bench as far as possible.
Transport safety
• When transporting the machine give consideration
to the weight distribution (machine is top-heavy).
Transport the machine horizontally and secured
on a suitable device.

SPECIAL SAFETY INSTRUCTIONS

• The pillar drill was designed to eliminate potential
hazards when it is used properly. However, there
are a few safety precautions to observe in order to
ensure that all residual hazards are ruled out.
Ensure proper voltage
• The voltage must comply with the specifications
on the rating plate.
Use a socket-outlet with earthing contact
• The device may only be operated from an outlet
with the properly installed earthing contact.
Extension cable!
• The cord cross section of an extension cable must
measure at least 1.5 mm². Always completely
unwind a cable reel prior to use. Check the cable
for defects.
Protection against electrical shock
• Keep the device away from moisture. The device
must neither be damp nor be operated in a humid
environment. Prior to every use, check the device
and the mains cable with plug for damage. Avoid
bodily contact with earthed parts e.g. pipes, radia-
tors, etc.
Protection against fire and explosion
• There are spark producing components inside
the device. Do not use the device in the vicinity of
combustible liquids or gases. Otherwise there is a
risk of fire or explosion.
Handle the device with care
• Do not use the cable to pull the plug out of the
socket. Protect the cable from heat, oil and sharp
edges. Keep your tools sharp and clean so that
you can work efficiently and safely. Follow the
maintenance regulations and the instructions for
changing tools.
Wear suitable work clothes and personal protec-
tion equipment
• Loose clothing is not suitable, as it can be caught
by moving parts, causing you to become entan-
gled. Wear a hair net if you have long hair. As a
general rule, jewelry should not be worn when
working with machine tools. Ensure that you wear
safety goggles. Not doing so could result in eye
injury.
Keep your work area neat and tidy
• Disorder in the work area can easily lead to ac-
cidents. Do not leave any tools, objects, or cable
in the direct vicinity of the work area, as this poses
a tripping hazard! Ensure that there is sufficient
lighting.
Watch out for other persons
• Watch out for other persons (especially children)
when using the device, and keep them away from
your work area. Do not let anyone touch the de-
vice or the power cable.
25 І 64